Art Resin Epoxy 1:1 – Crystal Clear High-Gloss Finish (10L Kit)

Art Resin Epoxy 1:1 is a premium epoxy resin system formulated for resin art and coating applications. It delivers exceptional clarity, depth, and a smooth self-levelling finish for professional-looking results.

Key specifications

Mix ratio	1:1 by volume
Working time	Approx. 30 minutes at 25 °C
Pour depth	1–12 mm per layer
Finish	Crystal clear, high gloss, self-levelling
Coverage	1 litre ≈ 1 m² @ 1 mm thickness
Full cure	Approx. 72 hours

Performance benefits

Excellent clarity and depth for a clean, professional finish
Self-levelling formulation for smooth, even coatings
Low viscosity for easy spreading and effective bubble release
UV-resistant formulation designed to reduce yellowing over time
Durable cured surface suitable for long-term artwork and display pieces

Ideal applications

Suitable for a wide range of creative projects, including:

Resin art and abstract artwork
Canvas coatings and mixed media
Timber artwork and sealed wood surfaces
Coasters, trays, and decorative items
Pigments, mica powders, and colour work
Jewellery, moulds, and craft applications

Technical overview

Specification	Details
Product type	Art and coating epoxy resin
Mix ratio	1:1 by volume
Total kit volume	10 litres (5L resin + 5L hardener)
Working time	Approx. 30 minutes at 25 °C
Touch dry	Approx. 8 hours
Full cure	Approx. 72 hours
Recommended pour depth	1–12 mm per layer
Coverage	1 litre ≈ 1 m² @ 1 mm thickness
Viscosity	Low
Finish	Crystal clear, high gloss
UV resistance	Formulated to reduce yellowing
Heat resistance	Up to approx. 80 °C
Odour	Low

Coverage

Coverage is based on a smooth, non-porous surface:

1 litre covers approximately 1 m² at 1 mm thickness.

How to use

Measure Part A and Part B at a 1:1 ratio by volume.
Mix thoroughly for a minimum of 3 minutes, scraping the sides and base.
Pour, allow to self-level, then remove surface bubbles with gentle heat.

Note: Seal porous surfaces prior to coating to help prevent air release and resin absorption.

Kit contents

5 litre Resin (Part A)
5 litre Hardener (Part B)

Total mixed volume: 10 litres

Product storage

Keep containers tightly sealed when not in use. Store at room temperature (approximately 18 °C) and away from direct sunlight. Do not store containers directly on concrete floors.

Safety directions

Use in a well-ventilated area. Avoid contact with eyes and skin. Protective gloves, mask and safety glasses should be worn when mixing and using this product.

Over-exposure may cause sensitisation. Uncured material can be removed using a suitable solvent or methylated spirits, followed by washing with warm soapy water.

Always wear a suitable mask when using solvent-based cleaners.

Epoxy Resin Tips, Questions & Answers

Expert guidance on mixing ratios, bubbles, cure times, deep pours epoxy resin.

View Resin Q&A

Art Resin Epoxy 1:1

Art Resin Epoxy 1:1 | 4L Kit

Art Resin Epoxy 1:1 | 2L Kit

Art Resin Epoxy 1:1 | 10L Kit